Grain-systems PNOT-305 Uživatelský manuál stáhnout pdf

Grain Systems • 1004 E. Illinois St. • Box 20 • Assumption, IL 62510

Phone: 217-226-4421 • Fax: 800-800-5329

PNOT-305 1

Product Notification

PNOT-305

Vision Touch Control Board Fuse

Replacement Instructions

To reduce the risk of electrical shock or damage to other electrical components always

set the main power supply disconnect switch to OFF and lock it in the OFF position using

a padlock before performing any service or maintenance work on the dryer.

Remove 4 phillips

head screws

Figure A: Touch screen computer.

Step 1: Open the switch panel on the lower

control box and locate the touch screen computer

on back side of the switch panel (see figure A).

Step 2: Remove the 4 phillips head screws shown

in figure A. After the screws have been removed

gently allow the circuit board to hang by the wires

that are connected to it (see figure B).

Figure B: After screws removed.

Step 3: After screws are removed and the inner

part of the touch screen computer is exposed

locate the internal touch control board (see figure

B).

Internal touch

control board

1 2 3 4

Grain Systems • 1004 E. Illinois St. • Box 20 • Assumption, IL 62510Phone: 217-226-4421 • Fax: 800-800-5329PNOT-305 1Product NotificationPN

Grain Systems • 1004 E. Illinois St. • Box 20 • Assumption, IL 62510Phone: 217-226-4421 • Fax: 800-800-5329PNOT-3052Step 4: Locate the 5am

Grain Systems • 1004 E. Illinois St. • Box 20 • Assumption, IL 62510Phone: 217-226-4421 • Fax: 800-800-5329PNOT-305 3Product NotificationPN

Grain Systems • 1004 E. Illinois St. • Box 20 • Assumption, IL 62510Phone: 217-226-4421 • Fax: 800-800-5329PNOT-3054Product NotificationPNO

Žádné komentáře

Grain-systems PNOT-305 Uživatelský manuál